Proceed PDSD User Manual

Page 62

Advertising
background image

62

When in doubt as to whether

THX cinema

processing should be included, listen

for a natural presentation of the treble. Films mixed for theatrical release exhibit
an elevated treble region when played back on a home system with flat response.
The

THX cinema

mode will correct this. Conversely, surround-encoded programs

without this high frequency emphasis might sound dull or lacking in detail when
(incorrectly) played in the

THX cinema

mode.

dolby pro logic surround

Some two-channel program material does not conform to film industry standards,
although it may still be Dolby Surround encoded so it can decode to four chan-
nels. Music videos on MTV, for instance, are often Dolby Surround encoded, but
have soundtracks which are produced in non-film studios. In fact, a growing
number of music CDs are mastered with surround sound. These sources and
others which have surround encoding but which are unlikely to have been mixed
or remixed in industry-standard production facilities should use the

pro logic

mode to avoid compensation where none is indicated.

stereo surround

The

stereo surround

mode has been carefully designed to extract real ambience

from your recordings rather than synthesizing something artificial that might be
quite alien to the music itself. The ambient cues found in the program material
are then used to provide appropriate information for the center and rear speakers.
The front Left and Right speakers are left unaffected by this mode, allowing you
to hear unadulterated stereo imaging with the addition of a genuine sense of hall
ambience.

Since this mode is based on the recordings themselves, it is normal to hear some
variation in the degree of the effect. Extremely “dry” recordings which lack any
significant ambience may not sound significantly different than when in

surround

off

mode (e.g., two-channel stereo). You may find that increasing the level of the

rear speakers is necessary in order to bring what little ambience is in a “dry” re-
cording up to a more enjoyable level.

mono surround

The

mono surround

mode can provide a sense of spaciousness and size to

monophonic program material such as some historical recordings and movie clas-
sics such as Casablanca or The Wizard of Oz. The

mono surround

mode makes

no effort to “electronically reprocess to simulate stereo” (a process which almost
always causes more harm than good). Instead, it uses sophisticated steering tech-
niques to create a sense of space in what would otherwise be a largely dimen-
sionless soundfield. It is particularly helpful when viewing mono program mate-
rial on a big screen, where a tiny mono image would simply sound wrong in
contrast to the big picture.

surround off

The

surround off

mode is intended for music reproduction without any form of

surround enhancement. In this mode, the Left and Right speakers are active along
with the subwoofer(s), and reproduce the input without any processing other
than the electronic crossover needed for the subs.

mono

The

mono

mode sums the incoming Left and Right signals. The result is sent to

the center channel speaker, as well as the subwoofer(s). This mode is especially
useful for older, classic films or historical recordings which have noisy mono
soundtracks. Since much of the noise is likely to be random in phase, significant
noise cancellation can often be achieved by playing these mono sources in a true

mono

mode.

Advertising