Signamax Model -065-7700 - Manual (Page 23)

Hardened Managed PoE Ethernet Switch
User’s Manual 22
Connecting to Power
Redundant DC Terminal Block Power Inputs or DC Jack
Power Input:
47-57VDC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on
the topside of the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach
the plug into a standard AC outlet with the appropriate AC voltage.
Redundant 47-57VDC DC Terminal Block Power
Input
Step 1: Connect the DC power cord to the plug-able terminal block on the
switch, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the switch.