Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 25)

AES Audio 1 = 0
Audio 2 = 1
Mode
specifies if the mediaHub HD Pro is
encoding audio or passing it through as
received Off
Encode
Passthrough
See AMO in API Only
functions?
Type
type of audio signal being encoded or
passed
Dolby Digital AC3
Musicam Layer II
Dolby E
Linear PCM (LP)
See AMO in API Only
functions?
Bitrate audio codec
64000-384000 kBits/sec (Musicam
encode)
64000-640000 kbits/sec (Dolby
Digital/passthrough)
See AMO in API Only
functions?
Volume Level volume in dB
user-defined using <left/right
arrow> and <select> buttons
range is -18 dBs to 8 dBs in
increments of 1 *.ECMD ALV
[channel] [level in dB]
Audio Channel 1 = 0
Audio Channel 2 = 1
Note: the Adtec mediaHUB-HD Pro encoder function does not support MPEG1 Layer 3 or MP3.
www.adtecdigital.com