Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 27)

Multicast
Transmit Port
port assignment used for transmitting a multicast
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD MSP
RTP
Turns RTP on or off
RTP allows for sequence numbering and timing, which are
crucial for the accurate playback of an audio or video data
stream. Control is editable if Multicast Mode is set to
'Send'.
Off = [0]
On = [1]
*.ECMD RTP
FEC Mode
Forward Edge Correction; send2 two FEC RTP streams in
addition to a source RTP stream enabling a receiver to
reconstruct missing packets in the source stream. Used in
conjunction with L and D values; described below.
Off = [0]
On = [1] when RTP is also
selected 'on')
*.ECMD FEP
FEC L
affects the maximum burstpacket loss that can be
recovered
4-20
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD FEP
FEC D defines latency involved in burstrecovery
4-20
user-defined using
<left/right arrow> and
<select> buttons
*.ECMD FEP
Capture
Enable or disable encoder capture to file. If enabled, all
encoded content will be captured to file. If disabled, file
capture is turned off.
On
Off
*.ECMD CCA
www.adtecdigital.com