Connections – Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 36
Connecting Your mediaHUB HD Pro
Using Telnet (standard 23 port)
To connect to your device using a terminal session, you will need to set the IP address of the unit. See earlier instructions on
setting the IP via the front panel.
Using a terminal window, complete the following:
Step
Action
1
Type 'telnet x.x.x.x' in a terminal window, without quotes, where x.x.x.x is the IP address of the unit.
2
Press <Enter>.
3
When prompted for a username, enter adtec.
4
When prompted for a password, enter none.
Once you see "User 'adtec' connected", the session is open and you may issue API commands to the unit.
For the mediaHUB HD Pro, there are specific commands for the encoder and decoder. Each has a unique way of accepting
commands. If using telnet is your preferred method of communication to your mediaHUB HD Pro, familiarize yourself with the
API commands and their respective command handlers. For more information on this, point your browser to the IPA of your
unit and look through the API notes that are described for the device.
FTP connections can be made to the adtec device using any ftp client.
Host: <ipa of the unit>
Default Username: adtec
Default Password: none
Port: 21
www.adtecdigital.com