Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 55)

The PID Tab
The PID tab is used to specify PID settings for programming.
Screenshot (reduced for clarity) :
Controls
Control Function Options
API
Command
PID
Paradigm
this control allows for preset PID values to be automatically loaded. Once
a selection is made from the drop-down menu, all values will populate
based on the PID configuration chosen.
Adtec
Tandberg
ATSC PGM 3
ATSC PGM 4
ATSC PGM 5
ATSC PGM 6
ATSC PGM 7
ATSC PGM 8
ATSC PGM 9
WBU-ISOG
none-GUI
only
PMT
identifies packets with the Program Map Table. Program Map Tables are
used to describe the properties of a single program. user-defined
hexadecimal *.ECMD
PPI
TS ID
Transport Stream identifier; used in the PAT packet to identify one stream
from others within the multiplex. user-defined
hexadecimal
*.ECMD TSI
Video
identifies packets which contain video Packetized Elementary Stream
(PES) data. user-defined
hexadecimal *.ECMD
VPI
PCR
identifies packets which contain the Program Clock Reference (PCR;
"Master Clock") adaptation field user-defined
hexadecimal *.ECMD
PRP
Audio 1 identifies packets which contain audio content for Channels 1 and 2
user-defined
hexadecimal *.ECMD
API
Audio 2 identifies packets which contain audio content for Channels 3 and 4
user-defined
hexadecimal *.ECMD
API
www.adtecdigital.com