Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 75
Analog Audio 2 Stereo (SAP) Balanced (5-Pin Removable Screw Terminal)
•
AES3-1 digital audio input uncompressed (PCM) or compressed bit stream passthrough from external Dolby 2.0, 5.1
or Dolby E encoders (BNC - 75 Ohm). Includes compressed bit stream output.
•
AES3-2 digital audio input uncompressed (PCM) or compressed bit stream passthrough from external Dolby 2.0, 5.1
or Dolby E encoders (BNC - 75 Ohm). Includes compressed bitstream output.
•
SDI embedded (16 channels) with video per SMPTE 272M for SD and SMPTE 299M for HD. User selectable group.
•
User-defined analog and digital level control with sample rate conversion on all inputs
•
Transport Outputs
ISO13818-1 MPEG 2 Transport Stream (188 byte only)
(x3 mirrored outputs)
♦
•
MPEG 2 Transport via GigE (UDP or RTP)
•
MPEG 2 Transport to local storage Constant Capture to storage (local or NAS)
•
ASI, IP and Constant Capture operate concurrently
•
Transport User Data
SMPTE 334 VANC data extraction for IEEE 708/608. Concurrent
•
User defined VANC Line 7-32 data extraction supported
•
Teletext: (NABTS) DVS053 Rev 6
•
Conditional Access
BISS 1
•
Table Compliance
MPEG Program Specific Information (PSI) Table Compliance:
PAT
♦
PMT
♦
•
DVB Service Information (SI) Table Compliance (Static)
SDT
♦
NIT
♦
TDT/TOT
♦
•
SCTE 35 Splice Point injection
•
ATSC A65B (PSIP) Table compliance (Static)
MGT (TVCT, STT, RRT, EIT)
♦
•
*For dynamic DVB-SI use Adtec’s DTA-3050 and DTVmanage SI Server *For dynamic A65B PSIP use Adtec’s DTA-3051 and
DTVGuide web service
Decoder Output Video Output
Confidence decode of encode via internal bus, No ASI loop required
•
SD/HDSDI SMPTE 259M (SD) and SMPTE 292M (HD) User definable resolution from D1 to 1080i including scaler for Up
and Down conversion
•
Composite D1 Video (NTSC/PAL) Not concurrent with HD
•
HDMI with HDCP and Audio
•
DVB-ASI Input
•
Audio Output
SDI Embedded audio stereo audio pair SMPTE 272M (SD) SMPTE 299M (HD) User defined PID
•
HDMI No analog audio output Decoder Video Profiles
•
MPEG 2 SD Profile 1: Adaptive Field Frame (AFF) ISO13818-2 MP@ML
•
MPEG 2 SD Profile 2: AFF ISO13818-2 422P@ML
•
MPEG 2 HD Profile 1: ISO13818-2 MP@H-14 (1440 x 1080)
•
MPEG 2 HD Profile 2: ISO13818-2 MP@HL (1920 x 1080 or 1280 x 720)
•
MPEG - 4.10 (AVC/H.264) [email protected] and L3.1 (max 10Mbps) (1920X1080 or 1280 x 720)
•
MPEG - 4.10 (AVC/H.264) [email protected] and L4.1 (max 20Mbps) (1920X1080 or 1280 x 720) Decoder Audio Profiles
•
Dolby Digital AC-3: Bit rates up to 640kbps. Sample rates of 32, 44.1 and 48KHz. Multi-channel up to 5.1 on S/PDIF and
downmix to 2 channel Dolby Pro Logic on analog.
•
MPEG 1 and MPEG 2 Layer I, II and III (MP3) 2.0: Bit rates up to 448kbps (Layer I), 384kbps (Layer II) or 320kbps (Layer
III). Sample rates of 16, 22.05, 24, 32, 44.1 and 48KHz. Single channel, dual channel, joint stereo and stereo modes.
•
AAC-LC MPEG-2 and MPEG-4:(max 384kbps) Sample rates of 7.35, 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48KHz.
Physical
•
www.adtecdigital.com