Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 39
The C&C Screen has two operating windows, the Status Bar and the Main Window:
Status Bar: the Status Bar is fixed- it will display regardless of what function is being displayed in the Main Window. The
current parameters of the unit's encode, decode, and transport functions are always in view and are updated in real time.
Further detail about the Status Bar is convered in a later section of this manual. The Status Bar aslo features "Jump Buttons"
that serve as a second way to access associated Menu Tabs.
Main Window: the Main Window is used to access the device's controls and operating settings. The Main Menu Tabs
determine which function is being controlled in the Main Window. Each Main Menu Tab is covered in more detail in further
sections of this manual.
Important Note for mediaControl Users
Adtec's mediaControl software interface is not supported as of Version 13 of the mediaHUB HD Pro's firmware. Do not
attempt to use mediaControl if you have installed firmware Version 13 or greater.
www.adtecdigital.com