Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 59)

When capturing to drive, you will need to set the following parameters and then click the Next button to proceed to encoding.
Segment Length: If you wish to capture your content in segments instead of one large file, you will need to set the segment
length in seconds. When given a value other than 0, the encoder will automatically stop at the given time limit, and restart
seamlessly giving each newly created file a unique file name. (Ex. If your given file name is adtec.mpg, the encoder will create
a series of files appending the base name with a date/time stamp.ex. adtec_081027_224457.mpg ) A value of 0 will assume
that you want one single file and the encoder will look to the record duration for the full length of that file.
Record Duration: Record duration specifies the run time for the encode. Format is HH:MM:SS:FF (hours, minutes, seconds,
frames)
File Name: Enter the desired name of your file. Include the full file name and .mpg extension. Do not argue a path for
encoding. All encoded files can be found in the media folder of the unit.
RS422
When the Controller Interface is set to "RS422" and <Next> is clicked, the Studio Control Tab screen will shift to this
configuration:
www.adtecdigital.com