AGI Security SYS-HD0420A - Manual (Page 42)

42 | P a g e
3-9. Setup - CONFIG Mode
In the SETUP menu, select the CONFIG tab . Then, the configuration menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change the value
of the menu item.
Figure 3.9.1. Configuration Setup Screen
Table 3.9.1. Configuration Setup
Item Description
SAVE SETUP TO
A USB User can save the current configuration (Setting values) of the DVR to the USB flash
drive. Plug in the USB flash on the front panel and press the button to start the saving
process.
LOAD SETUP
FROM A USB User can upload the configuration of the DVR to another DVR using the USB
Flash drive. Plug in the USB flash drive on the front panel and press the button to
start the loading process.