Axel Remote Management V2 - Manual (Page 19)

Axel Remote Management
13
Enter the password to continue.
3.4 - IMPORTING TERMINALS FROM AUTO-CONFIGURATION
The Auto-Configuration function allows terminal updates to be automatically
processed. (See Chapter 6)
This function may be independently run from AxRM. ("Service Mode”, see
Chapter 6.2.2)
Each time AxRM is run new devices recorded by the Auto-Configuration service
are checked. If new terminal descriptions are found, or the terminal descriptors
have changed, the following dialog box is displayed:
Select terminals to be added to the database.
Note: the terminal database may also be updated later. (See Chapter 4.4.4)