Axel Remote Management V2 - Manual (Page 33)

Axel Remote Management
27
4.3.3 - Adding Terminals Manually
A terminal can be added manually to the database. In this case certain
information is required.
Access to this function is by the horizontal menu [Action]-[Add device], by the
contextual menu or by the toolbar.
Here is the icon and corresponding dialog box
icon
The following information is required:
- IP address or DNS name: (mandatory) to identify and verify the terminal
on the network with ping.
- User Friendly Name (optional)
- Identification: (mandatory for admin functions - not mandatory to enter
in database). Enter either serial number or MAC address, this is used to
identify terminal then press “Get It’ button to get details directly from the
terminal or manually enter details.
- Hardware/Firmware: this value can only be obtained by the button '?'
located on the right.
- Comment: free field for user comments.
After validation the terminal is added to the current location in the database.