Axel Remote Management V2 - Manual (Page 53)

Axel Remote Management
47
- Download Firmware
- Send Configuration (send file generated above)
- Reboot (the device).
Notes:
1 - If the terminal is password protected the password must be entered in
the "Password" field.
2 - The database is updated automatically if the auto-update function is
enabled. (See chapter 7.3.4)
5.3 - REMOTE ACCESS TO A TERMINAL
A remote access to a terminal is either taking the control of a remote terminal
(see Chapter 5.3.1) or entering the interactive set-up of a remote terminal (see
Chapter 5.3.2).
This function is launched via the toolbar button, the contextual menu, or via
[Action]-[Terminal commands]-[Remote Access] and gives direct accesses
to the terminal over network.
☺
: The remote access is also offered by a separate software (Axel Viewer)
installed in the same time than AxRM.
Only one terminal can be accessed at a time.
Note: these remote access functions can be enabled/disabled through the
terminal set-up.