Axel Remote Management V2 - Manual (Page 72)

66
Axel Remote Management
6.3 - OVERVIEW OF ENTIRE PROCESS
When the terminal is switched on for the very first time, the auto-configuration
function is automatically started. No human intervention is necessary.
The following happens:
- Terminal obtains an IP address by DHCP (optional).
- Terminal locates the AxRM server. (Via DHCP and DNS or by the
terminal settings)
- Terminal sends auto-configuration requests.
- New firmware file received (optional).
- New configuration file received.
For more information on the behaviour of the terminal in auto-configuration, see
the AX3000 User's Manual.