Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 11)

10
The Traffic Assist Highspeed
Accessories
Mains power supply unit
This power supply allows connection of
the Traffic Assist Highspeed to a mains
outlet.
Requirements for power supply:
Alternating current
• 100-240 V
0.2 Amps
• 50-60 Hertz
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not
included in the scope of supply). Please
contact your local stockist for more in-
formation.
Headset
When using the Traffic Assist High-
speed as an MP3 player, commercially
available headphones with a 3.5 mm
jack or adapter can be connected (not in-
cluded).
Information about
documentation
Quick start guide
The Quick Start Guide is designed to
provide a brief introduction to operating
your Traffic Assist Highspeed. The most
important basic functions of the Traffic
Assist Highspeed are explained in the
Quick Start Guide.
Operating instructions
A comprehensive explanation of the
Traffic Assist Highspeed functionalities
is contained in these operating instruc-
tions.
Danger!
Headsets must not be worn during tra-
vel. Observe national regulations and
legislation on this matter.
When using the headset, lower the vo-
lume so that your hearing is not dama-
ged.