Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 75)

74
Settings
Settings Selecting the settings
You can pre-select various basic settings
for all applications of the Traffic Assist
Highspeed.
X Push the button Settings in the main
menu.
This calls up the setting menu for the
further selections.
The setting menu
The various setting possibilities can be
selected from the setting menu.
Operation
Selection possibilities
The desired selection is chosen by
pushing the desired button. The funtio-
nality of the buttons varies according to
the selection and is described under
"The individual menu points" on page
74.
Closing the setting menu
The setting menu is closed by pushing
the back button, and the main menu then
appears.
The individual menu points
Energy
Your Traffic Assist Highspeed may be
operated using an external power supply
unit or using an integrated rechargeable
battery.
The energy supply and its condition is
visualised using the status display.
Displaying the energy supply
The status display can be called up using
the following button.
X Push the button Energy.
The status display is called up and
the energy supply is visualised.
3001
9017
Note:
The current charge condition is particu-
larly important when operating from
batteries. If there is insufficient energy,
then the navigational aid cannot be
maintained until the destination is rea-
ched, for example.
9027