Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 21)

20
General operations
Connecting to the cigarette
lighter
Power supplies using a vehicle battery
are connected up as follows using the cable
supplied for the cigarette lighter.
X Hold the USB socket at the corrugated
grip area and push it into the connec-
ting socket to the stop without emplo-
ying excessive force.
X Plug the plug adapter into the cigarette
lighter.
TMC antenna*
The TMC antenna included in the
accessories is used to receive traffic
announcements.
X Push the connector on the TMC anten-
na into the socket without employing
excessive force.
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
Note:
If the cigarette lighter has just been used
and is still warm, wait until this has
cooled down in its mounting.
Note:
If the engine is switched off, using
the vehicle's power supply through the
cigarette lighter will slowly drain
the vehicle battery! Do not therefore
operate the Traffic Assist Highspeed
for extended periods with the engine
off.
Note:
Headphones cannot be connected when
the TMC antenna is connected. Howev-
er, traffic announcements can be heard
when the headphones are connected.
Note:
The integrated GPS antenna is not
suitable for use in vehicles with anti-
glare windows (metalised thermo-glass
or metal foil, indicated by the window
label - SIGLA SOL, SIGLA CHROM,
SIGLA, KOOL-OF, SUNGATE, etc.)
and vehicles with fine-meshed heating
wires in the windows.
If this is the case, use an external GPS
antenna. Please consult your local
specialist dealer.
*Applies only to the Traffic Assist Highspeed II