Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 27)

26
General operations
Entering characters
Characters are entered by pressing the
keys in the central area.
Once the entry is complete, the process
is concluded by pressing the
key
and the entry passed on to the Traffic
Assist Highspeed for processing.
Adopting suggestions
When a navigation destination is ente-
red, the Traffic Assist Highspeed com-
pares the entry with the set of data on the
memory card. The Traffic Assist High-
speed then only makes those letters
which are possible available for selec-
tion and adds a sensible suggestion to
the letters already entered.
The suggestion and the characters which
cannot be selected are depicted
with a slightly darker font. If the desired
input appears in the upper display area
after entering the first few letters or
numbers, you can immediately accept
this suggestion.
X To accept the suggested entry, press
the destination or the button
.
Scrolling through the lists
If you have already entered some of the
letters of the selection you want, you can
use the selection list to display all the
destinations containing the combination
of letters in question.
X To call up the selection list, press the
key.
The selection list appears.
X Press the arrow keys on the
right hand side of the screen to scroll
through the list.
X Press the destination you want.
The destination is adopted and the selec-
tion list is closed.
6007
5020
Note:
If necessary, you can switch off the
smart speller in the navigation settings.
It should also be noted that in southern
countries (e.g. Italy), the "prefix" (e.g.
via Gran Mundo) needs to be entered
afterwards (e.g. Gran Mundo_via).
6007
5020
6007
5021
6008
7006