Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 45)

44
Navigational mode
You will find information about wor-
king with the entry menu in the "Entries
made with the entry menu" on page 25
chapter.
You will find information about scrol-
ling in lists in the "Scrolling through the
lists" on page 26 chapter.
Once you have selected a point of inte-
rest, the keys in the lower area can be
used:
• to display points of interest on the
map
• define options of the drive profile
• to save the point of interest in the
destinations memory
• to start directions to the point of in-
terest immediately.
Navigation menu: Select on
map
If the destination required cannot yet
or can no longer be found in the destina-
tions memory, the
Select on map button
allows you to select it directly.
No address details are asked for in this
case.
X Press the Select on map key to make a
direct selection.
The map display appears.
X Gently press the screen surface until
a circle of dots is drawn around the
destination requested. The destination
is recorded.
Information on the point selected
is loaded from the set of data and dis-
played. There are buttons under the in-
formation box which can be used to call
up several functions which are provided
for the route point selected.
The following function keys are provi-
ded for non-active directions to the des-
tination:
Note:
The Category boxes do not have to
be completed. These are only used
to restrict the list of points of interest.
In large towns, this list may be very
long.
Note:
You may have to use the zoom keys to
increase the area displayed to find the
street required.
6004
6009
Key Meaning
Navigation Starts navigation
Add Adds the destination to
the route
Save Allows your destination
to be given a name
via the entry menu and
saves this in the destina-
tions memory
Search nearby Entry menu as for normal
POI entries