Beisler 2211-5 - Manual (Page 15)

- B 15 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
B.2
Functions of the machine
Fig. 2/3
Fig. 2
Fig. 3
B.2.3 Lining up the left slash selvage
Ideally, the slash selvage and the left trousers component
are premarked by a gusset. If a gusset is not available,
the line-up position is marked with tape or with a felt pen
at the working plate or at the pick-up plate.
Slash selvage line-up position, Fig. 2:
The slash selvage clamp 1 is open during the line-
up process.
The slash selvage 3 is lined up at the stop rail 4 of
the pick-up plate. The exact position to the cutter 2
is marked by the gusset in the slash selvage.
Slash selvage clamp, Fig. 2:
The slash selvage clamp 1 closes and secures the
slash selvage 3 while the cloth material is clipped and
then crimped over.
Crimping over and picking up the slash selvage, Fig. 3:
The folder 1 moves right to the pick-up plate 2. The
slash selvage 3 is clipped by the cutter 7 and cr-
imped over and picked up by the folder clamp 4.
The cutter 8 of the working plate opens, the
cutter 5 is passive and remains concealed in the
working plate.
The both positioning lamps 5 support the lining up
of the gusset of the left trousers part to the cutter 8.