Beisler 2211-5 - Manual (Page 17)

- B 17 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
B.2
Functions of the machine
B.2.5 Left slash selvage/trousers component sewing
Main clamp, Fig. 6:
The main clamp 2 moves to the insertion position and
picks up the trousers component. The folder moves up
to its start position.
The main clamp transports the trousers component on
the working plate from the insertion station to the se-
wing head.
Sewing head, Fig. 6:
The sewing head 1 only performs the sewing stitch
and thread cutting functions. All other functions, such
as seam length or setting the beginning and the end
of the seam, are acquired by the machine's sensoring
system and controlled by the program control in accor-
dance with the set values.
Fig. 6
Fig. 6
Threads
Thread stock and thread supply of the sewing head are
monitored by sensors (top thread sensor and rest
thread sensor).
The thread holder can hold two thread spools.
Blow-off, Fig. 6:
After the sewing process, the trousers component 4
is blown off the worktable with compressed air 3.