Beisler 2211-5 - Manual (Page 47)

- C 47 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.4 Repairs
Any repairs to the machine must only be carried out by:
•
authorized Technical Service,
• personnel that has been instructed about the setting
up and maintenance of the machine on the occasion
of a training by the supplier or manufacturer.
Use only original spare parts for installing or replacing
machine components.
Manufacturer and supplier will not be held responsible for
spare parts from third parties.
NOTE - Programming instructions!
Repairs require that machine components carry out
their individual movements and that the machine
movements are tested. These functions are controlled
on level 1 of the service menu.
For the necessary instructions, please refer to the
programming instructions section D.
Operating panel replacement:
1. Disconnect machine from power supply.
2. Fig. 6: Remove two lock screws 4 and disconnect
interface connector 5.
4. Remove operating panel 1, install new panel and
secure using screws.
5. Copy sewing programs: Insert memory stick 3 into
socket 2 (see Section D, Programming Instructions).
Fig. 6
Fig. 6