Beisler 2211-5 - Manual (Page 40)

- C 40 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
C.2
Storage and location requirements
C.2.1 Floor quality
The floor of the room where the machine is to be instal-
led must have a sufficient surface strength. The location
of the machine must be free of vibrations.
If several machines are to be installed in one room, the
static load bearing capacity of the ceiling must be consi-
dered.
Weight:
•
Machine with accessories approx 210 kg
C.2.2 Interior climate
Climatic requirements for the operating room:
The machine must only be stored or operated in closed
operating rooms.
•
Room temperature +10 °C to +45 °C
• Relative humidity 80 % max.
C.2.3 Floor space required
For operation during production and for service works, the
machine must be freely accessible from all sides. On all
sides, there must be a minimum clearance of 1 m.
Machine dimensions:
•
L x W x H 1700 x 1200 x 1600 mm
NOTE - Electromagnetic interference!
The machine must not be installed in the immediate
vicinity of devices or electrical components (e.g. trans-
formers) generating a strong magnetic field as other-
wise the correct function of the program control may
be impaired.
C.2.4 Supply connections
The machine requires on-site power and compressed air
sources.
Power connection:
The power supply of the machine requires a properly
grounded power connection with:
•
Grounding plug 230 V ± 10 %, 50/60 Hz
• Fusing 16 A
NOTE - Peak voltages!
The correct function of the machine requires that the
power system supplies a constant current. Peak vol-
tages may particularly impair the stability of the pro-
gram control.
Compressed air supply:
The on-site compressed air supply system must meet the
following requirements:
•
Operating pressure 6 bar
• Compressed air quality oil-free
• Compressed air consumption 4.16 NL
Vacuum source:
The on-site vacuum source must meet the following re-
quirements:
•
Displacement (minimum) 130 m³/h