Beisler 2211-5 - Manual (Page 31)

- B 31 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
B.3
Operation
B.3.7 Testing the cutters
Sharpness and function of the three cutters can be chek-
ked individually. When the corresponding function key is
pressed, a cutting movement is performed.
1. Request the cutter test menu.
• Press  key.
K
The display shows the symbols of the selectable functions
on this level.
%%%EFGTS

2. Rear working plate cutter (left trousers component).
E
• Press  key.
3. Front working plate cutter (right trousers component).
F
• Press  key.
4. Pick-up plate cutter (left slash selvage / right side
pocket).
G
• Press  key.
5. Pick-up plate cutter (left side pocket / right slash sel-
vage at ladies' trousers).
T
• Taste  drücken
6. Load bobbin.
S
• Press  key.
B.3.8 Resetting the day counter to zero
Use this function to reset the day counter for a program
cycle or for a completed working cycle to zero.
1. Move to level 1.
Press  key.
The display shows the symbols for selectable functions
on this level.
%&'4(>5

2. Request the day counter reset function.
(
• Press  key.
The day counter is now reset to zero.
3. Return to start level.
Press  key.
Display: PART: 0000