Operating instructions model xr2500f panels, Mounting instructions, Listings and approvals – DMP Electronics XR2500F User Manual

Page 60

Advertising
background image

LT

-0759

1.03

©

2009

Digital

Monitoring

P

roducts,

Inc.

800-641-4282

www.dmp.com

Made in the USA

INTRUSION • FIRE • ACCESS • NETWORKS

2500 North Partnership Boulevard

Springfield, Missouri 65803-8877

9043

OPERATING INSTRUCTIONS

MODEL XR2500F PANELS

NORMAL STANDBY CONDITION

When the system is in the normal standby condition, the keypad shows either the time of day or a blank display.

ALARM CONDITION

When the system is in an alarm condition, the keypad display shows the violated zone name(s) followed by an

alarm display.

ALARM SILENCE

To silence the alarm while the bell or siren is sounding, enter your code number and press the COMMAND key.

This silences the alarm but does not cancel any alarm reports to the central station.

RESETTING DETECTORS

To reset a smoke or other detector, enter the User Menu by pressing the COMMAND key until

MENU? NO YES

appears in the display. Press the top row key under

YES. The display shows ENTER CODE: -. Enter your code

number and press COMMAND. The keypad display now shows

ALARM SILENCE? if your code allows. Press the

COMMAND key until

SENSOR RESET? appears in the display. Press any top row key.

TROUBLE CONDITION

When a device is in a trouble condition, the keypad tones and displays the zone or device name followed by

TRBL. Press any top row key to silence.

SYSTEM TESTING

You should test the security system weekly to ensure proper operation. You can do this through a

function in the

User Menu. After entering the User Menu, press the COMMAND key until

SYSTEM TEST? displays. Press the left

most top row Select key. The system bell, battery, and communication to the central station receiver system is

then tested.

ALARM SERVICE

If service is required for this system, please contact:

Company _____________________________________________
Address ______________________________________________
Telephone ____________________________________________

Mounting Instructions
Attach the above operating instructions

to the front, or framed and located

adjacent to, the panel or a keypad with

an alphanumeric display.

Listings and Approvals

California State Fire Marshal (CSFM)
FCC Part 15
FCC Part 68 Registration ID CCKAL00BXR500
New York City (MEA)
Underwriters Laboratories (UL) Listed

Commercial and Residential Fire, Burglar, Holdup, and

Access Protected Premise Unit

ANSI/UL 294 Access Control System Units

ANSI/UL 365 Police Connected Burglar

ANSI/UL 609 Local Burglar

ANSI/UL 636 Holdup Alarm Units Systems Accessory

ANSI/UL 1023 Household Burglar

ANSI/UL 1076 Proprietary Burglar

ANSI/UL 1610 Central Station Burglar

ANSI/UL 1635 Digital Burglar

ANSI/UL 985 Household Fire Warning

ANSI/UL 864 Fire Protective Signaling 9th Edition

UL Standard Line Security
UL Encrypted Line Security

Advertising