Cybex 625A Arc Trainer - Manual (Page 31)

Cybex Arc Trainer 625A/625AT Owner’s Manual
31
Lift and move unit
1. Remove large bolts and shipping supports. Keep package material on linkage arms at this
time. This will protect the paint from scratching during assembly.
2. Grasp each rear support leg firmly and lift with one person on each side.
3. Lift the lower rear support legs using proper lifting methods so the front transport wheels are
able to roll on floor.
4. Move unit to intended location.
5. Lower rear support legs.
Attach 625AT console assembly
1. Plug the upper heart rate cable into the lower heart rate cable.
Lower Heart
Rate Cable
Upper Heart
Rate Cable
Upper Display
Cable
Console
Locknuts (4)
Bolts (4)
Frame
Lower Display
Cable
2. Place the console into position on the frame. Do not pinch cables while lowering the console.
3. Insert (from underneath) the four bolts into the frame and console.
4. Thread the four locknuts onto the bolts by hand.
5. Tighten the four bolts and locknuts with a 7/32” Allen wrench and a 9/16” open-end wrench.
6. Plug the upper display cable into the lower display cable.