Cybex 625A Arc Trainer - Manual (Page 44)

Cybex Arc Trainer 625A/625AT Owner’s Manual Cybex Arc Trainer 625A/625AT Owner’s Manual
44
3. Plug the USB stick into the USB port of the MCC board.
Console
USB Port
MCC Board
4. Press and hold Scan/Hold and Up for 3 seconds.
5. Press Down to navigate to “Cloning”. The console will display “LOAD [FILE] [ oFF ]
[USB]”. If “LOAD” is not displayed, press Up or Down to toggle setting from “SAVE”
to “LOAD”
6. Press Enter to save settings to USB stick. Console will beep four times when complete.
7. Press Pause and remove USB stick.
8. Install the back cover with four screws using a Phillips screwdriver.