Cybex 625A Arc Trainer - Manual (Page 43)

Cybex Arc Trainer 625A/625AT Owner’s Manual
43
3. Plug the USB stick into the USB port of the MCC board.
Console
USB Port
MCC Board
4. Press and hold Scan/Hold and TV Up for 3 seconds.
5. Press Down to navigate to “Cloning”. The console will display “SAVE [FILE] [ on ] [USB]”
6. Press Enter to save settings to USB stick. Console will beep four times when complete.
7. Press Pause and remove USB stick.
8. Install the back cover with four screws using a Phillips screwdriver.
Transfer settings to another unit
1. Remove the four screws from the back cover using a Phillips screwdriver.
Back
Cover
Screws (4)
2. Remove back cover.