Remove access cover – Cybex 625A Arc Trainer User Manual
Page 74
Advertising
Cybex Arc Trainer 625A/625AT Owner’s Manual
Cybex Arc Trainer 625A/625AT Owner’s Manual
74
Remove Access Cover
1. Remove the two lower screws securing the access cover using a Phillips screwdriver.
Lower Screws (2)
Access
Cover
Upper Screws (2)
2. Remove two upper screws securing the access cover using a Phillips screwdriver. Refer to the
above diagram.
3. Remove the access cover.
WARNING: Serious injury or death can occur. To avoid death or injury the following
precautions must be observed. Wait until flywheel cools before servicing. A
hot flywheel may burn user.
Advertising