Flowserve MX FOUNDATION Fieldbus Field Unit - Manual (Page 62)

MX/QX FOUNdaTION Fieldbus Field Unit FCd LMENIM2330-01 – 08/11
62
Transducer Block Parameters Description
Bit 13 Pair # 13 (D13/Q13) of wheel 4 fault
Bit 14 Pair # 14 (D14/Q14) of wheel 4 fault
Bit 15 Pair # 15 (D15/Q15) of wheel 5 fault
Bit 16 Pair # 16 (D16/Q16) of wheel 5 fault
Bit 17 Pair # 17 (D17/Q17) of wheel 5 fault
Bit 18 Pair # 18 (D18/Q18) of wheel 6 fault
Bit 19 Pair # 19 (D19/Q19) of wheel 6 fault
Bit 20 Pair # 20 (D20/Q20) of wheel 6 fault
Bit 21 Pair # 21 (D21/Q21) of wheel 7 fault
Bit 22 Pair # 22 (D22/Q22) of wheel 7 fault
Bit 23 Pair # 23 (D23/Q23) of wheel 7 fault
Bit 24 Pair # 24 (D24/Q24) of wheel 8 fault
Bit 25 Pair # 25 (D25/Q25) of wheel 8 fault
Bit 26 Pair # 26 (D26/Q26) of wheel 8 fault
Bit 27 Pair # 27 (D27/Q27) of wheel 9 fault
Bit 28 Pair # 28 (D28/Q28) of wheel 9 fault
Bit 29 Pair # 29 (D29/Q29) of wheel 9 fault
Bit 30 and Bit 31 Not used
SOURCE_OF_LIMIGARD The bit enumerated parameter provides LimiGard™ source of
failure information. Bit value 1 indicates the active source of
Limigard.
Bit 00 Not used
Bit 01 CCW & ENABLE asserted but CCW contactor not present
Bit 02 CW & ENABLE asserted but CW contactor not present
Bit 03 ENABLE not asserted but relay contact closed in error
Bit 04 ENABLE not asserted but relay drive transistor asserted
in error
Bit 05 ENABLE asserted but relay contact not closed
Bit 06 ENABLE asserted but relay drive transistor failed
Bit 07 CCW not asserted but relay contact closed in error
Bit 08 CCW not asserted but relay drive transistor asserted in
error
Bit 09 CCW asserted but relay contact not closed
Bit 10 CCW asserted but relay drive transistor failed
Bit 11 CW not asserted but relay contact closed in error