Flowserve MX FOUNDATION Fieldbus Field Unit - Manual (Page 74)

MX/QX FOUNdaTION Fieldbus Field Unit FCd LMENIM2330-01 – 08/11
74
HARD_TYPES
The types of hardware available as channel numbers.
HI_ALM
The status for high alarm and its associated time stamp.
HI_HI_ALM
The status for high high alarm and its associated time stamp.
HI_HI_LIM
The setting for high high alarm in engineering units.
HI_HI_PRI
Priority of the high high alarm.
HI_LIM
The setting for high alarm in engineering units.
HI_PRI
Priority of the high alarm.
IO_OPTS
Options, which the user may select to alter input and output block processing.
IN
The primary input value of the block, required for blocks that filter the input to get the PV.
IN_1
Auxiliary input value to the block, used for other values than the PV.
ITK_VER
Major revision number of the interoperability test case used in certifying this device as interoperable.
The format and range of the version number is defined and controlled by the Fieldbus Foundation.
NOTE: The value of this parameter will be zero (o) if the device has not been registered as
interoperable by the FF.
LIM_NOTIFY
Maximum number of unconfirmed alert notify messages allowed.
L_TYPE
Determines if the values passed by the transducer block to the AI block may be used directly (Direct)
or if the value is in different units and must be converted linearly (Indirect), or with square root (Ind
Sqr Root), using the input range defined by the transducer and the associated output range.
LO_ALM
The status of the low alarm and its associated time stamp.
LO_LIM
The setting for the low alarm in engineering units.
LO_LO_ALM
The status of the low low alarm and its associated time stamp.
LO_LO_LIM
The setting of the low low alarm in engineering units.