Flowserve MX FOUNDATION Fieldbus Field Unit User Manual
Page 72
MX/QX FOUNdaTION Fieldbus Field Unit FCd LMENIM2330-01 – 08/11
72
COLLECTION_DIRECTORY
A directory that specifies the number, starting indices, and DD Item IDs of the data collections in each
transducer within a transducer block. For further information, please refer to the Transducer Block
Application Process – Part 1 (FF-902) specification.
CONFIRM_TIME
The time the resource will wait for confirmation of receipt of a report before trying again. Retry shall
not happen when CONFIRM_TIME = 0.
CONTROL_OPTS
Options, which the user may select to alter the calculations done in a control block.
CYCLE_SEL
Used to select the block execution method for this resource.
CYCLE_TYPE
Identifies the block execution methods available for this resource.
DD_RESOURCE
String identifying the tag of the resource, which contains the Device Description for this resource.
DD_REV
Revision of the DD associated with the resource — used by an interface device to locate the DD file
for the resource.
DEV_REV
Manufacturer revision number associated with the resource — used by an interface device to locate
the DD file for the resource.
DEV_TYPE
Manufacturer’s model number associated with the resource — used by interface devices to locate the
DD file for the resource.
DISC_ALM
The status and time stamp associated with the discrete alarm.
DISC_LIM
State of discrete input, which will generate an alarm.
DISC_PRI
Priority of the discrete alarm.
DV_HI_ALM
The status and time stamp associated with the high deviation alarm.
DV_HI_LIM
The setting of the high deviation alarm limit in engineering units.
DV_HI_PRI
Priority of the high deviation alarm.
DV_LO_ALM
The status and time stamp associated with the low deviation alarm.
DV_LO_LIM
The setting of the low deviation alarm limit in engineering units.