Flowserve MX FOUNDATION Fieldbus Field Unit User Manual
Page 66
MX/QX FOUNdaTION Fieldbus Field Unit FCd LMENIM2330-01 – 08/11
66
Transducer Block Parameters
Description
Subparameter POLARITY
Analog-1 output polarity configuration. Value 1=High value at
open/max and 2=High value at close/min.
Subparameter ATT_SCALE
ATT scaling when analog-1 output function configured as ATT.
Subparameter VALUE
Analog-1 output value. Range: 0 to 100%.
ANALOG_2_OUTPUT
Record provides support for configuration of analog-2 output
board.
Subparameter STATUS
On/off status of the analog-2 output board. Value 1=On and
2=Off.
Subparameter FUNCTION
Analog-2 output function configuration. Value 1=APT and
2=ATT.
Subparameter OFFSET
Analog-2 output type, value and range configuration. Value
1=4-20mA, 2=0-20mA, 4=1-5V, 8=0-5V, 16=2-10V and
32=0-10V.
Subparameter POLARITY
Analog-2 output polarity configuration. Value 1=High value at
open/max and 2=High value at close/min.
Subparameter ATT_SCALE
ATT scaling when analog-2 output function configured as ATT.
Subparameter VALUE
Analog-2 output value. Range: 0 to 100%.
STD_DIGITAL_OUTPUT_RELAYS
Configuration for R1, R2, R3 and R4 relays on standard digital
output relay board.
Subparameter ENABLED
Digital output relays enabled status. Value 0=Disabled and
1=Enabled.
Subparameter STATUS
Contact operation status.
Bit 00 to Bit 02 Not used
Bit 03 RM contact status
Bit 04 R4 contacts status
Bit 05 R3 contacts status
Bit 06 R2 contacts status
Bit 07 R1 contacts status
Subparameter R1_FUNCTION
Function assigned to the relay.
Subparameter
R1_CONTACT_TYPE
User configurable realy contact type. Value 1=Close, 2=Open
and 4=Blinker.
Subparameter R1_POSITION
The relay gets energized when the actuator moves the valve to
this user configurable position.
Subparameter R2_FUNCTION
Function assigned to the relay.
Subparameter
R2_CONTACT_TYPE
User configurable realy contact type. Value 1=Close, 2=Open
and 4=Blinker.
Subparameter R2_POSITION
The relay gets energized when the actuator moves the valve to
this user configurable position.