IDK GF-100 - Manual (Page 11)

GF-100 User’s Guide
11
■ DDC monitor (P.45)
● Outputs the DDC communication data of the source and sink devices to browser or the TCP/IP port
“1100”.
GF-100 Sink device
Source
device
[Fig. 2.4] DDC monitor
■ Cable/transmission path test (P.48)
● Outputs the test signals and measures the quality (bit color) of the cable/transmission path.
● The test signals consist of random data and data that is under tougher condition
(the hardware of the
cable and its transmission).
● The resolution and color depth of the test signals can be selected.
● With two GF-100 devices, the transmission path test between two distant sites can be performed.
Cable GF-100
Transmission
path
GF-100 GF-100
Test signal Test signal
[Fig. 2.5] Cable test [Fig. 2.6] Transmission path test
■ Additional function
● Resume function (P.58)
Note: The GF-100 is a simplified analyzer for field supports of AV systems. Please note that it does not
provide calibrations.