IDK GF-100 - Manual (Page 60)

GF-100 User’s Guide
60
Setting item Page Menu Set value Default
Test tone: output channel P.43 TEST PATTERN → TONE CH
CH1-CH8
CH1-CH2
CH1 to CH8
CH1-CH2
Test tone: standard level P.44 TEST PATTERN → TONE LEVEL -20 dBFS, 0 dBFS -20 dBFS
Recording item P.47
TOP → DDC MONITOR → HP/DDC LOG
TOP → DDC MONITOR → EDID LOG
TOP → DDC MONITOR → HDCP LOG
TOP → DDC MONITOR → OTHERS LOG
OFF, ON ON
Beep P.47
TOP → DDC MONITOR → BUZZER
OFF, ON ON
DDC monitor escape
sequence
P.47 TOP → DDC MONITOR → ESCAPE CODE DISABLE, ENABLE ENABLE
Test signals resolution P.53 CABLE TEST → RESOL.
[email protected] to
[email protected]
1080p @59.94Hz
The amount of test data P.53
CABLE TEST → AMOUNT
5% to 100 % 5%
Test signals color depth P.53 CABLE TEST → COL.DEPTH
8 bit
10 bit
12 bit
8 bit
Waiting time for starting pixel
scan
P.54 CABLE TEST → CAPT.WAIT 500ms to 30000ms 2000 ms
Starting measurement P.54 CABLE TEST → START MANUAL, AUTO MANUAL
Requesting input signals P.55
SETTINGS → VIDEO INPUT → SIGNAL
REQUEST
OFF, 1 sec to 30 sec 20 sec
Input DC balance P.55
SETTINGS → VIDEO INPUT → RECV OFFSET
DISABLE, ENABLE DISABLE
HDCP enabled/disabled P.55
SETTINGS → VIDEO INPUT → HDCP INPUT
ACTIVE, INACTIVE ACTIVE
Input bus reset time P.56 SETTINGS → VIDEO INPUT → BUS RESET TIME OFF, 1ms to 800ms 200ms
Outputting signals forcibly P.56 SETTINGS → VIDEO OUTPUT → FORCED OUT OFF, ON OFF
Setting current P.56 SETTINGS → CLOCK - -
IP P.57 SETTINGS → LAN → IP ADDRESS - 192.168.001.199
Default gateway P.57 SETTINGS → LAN → GATEWAY ADDR. - 192.168.001.001
Subnet mask P.57
SETTINGS → LAN → SUBNET MASK
- 255.255.255.000
Time for turning off backlight P.58 SETTINGS → OTHERS → BACKLIGHT OFF
DISABLE, 1 sec to 600
sec
DISABLE
Beep sound P.58 SETTINGS → OTHERS → BUZZER OFF, ON ON
Resume P.58 SETTINGS → OTHERS → RESUME
OFF, ON
5min to 120weeks
ON
Version P.58
SETTINGS → OTHERS → FIRM VER.
- -
SETTINGS → OTHERS → BOAD VER. - -
SETTINGS → OTHERS → FPGA VER. - -