Kawai MP10 - Manual (Page 72)

72
SY
STE
M
Me
nu
The SYSTEM menu contains parameters and settings that affect the general operation of the MP10.
The settings are grouped into four categories: Utility, Offset, User, and Reset, selected using the function buttons.
SYSTEM parameters will be memorised automatically upon exiting the menu.
„ SYSTEM Menu parameters
Category Parameters
Utility System Tuning, System Channel, LINE IN Level, Volume Fader Action, LED Brightness,
Out Mode, LCD Reverse, LCD Contrast, Foot Switch Mode, Eff. SW Mode, Lock Mode
Offset EQ Offset ON/OFF, EQ Offset Hi/Mid/Lo, Reverb Offset
User User Touch Curve, User Temperament
Reset Reset One Sound, Reset One Setup, Reset System, Reset Recorder,
Reset All Sound, Reset All Setup, Reset PowerOn, Factory Reset
„ Entering the SYSTEM Menu
Press the SYSTEM button.
The LED indicator for the SYSTEM button will turn ON, and the
SYSTEM Menu will be shown in the LCD display.
„ Selecting the SYSTEM parameter category
After entering the SYSTEM Menu:
Press the F1, F2, F3, or F4 function buttons to select the desired
SYSTEM parameter category.
Function button SYSTEM parameter category
F1 Utility
F2 Offset
F3 User
F4 Reset
„ Adjusting SYSTEM parameters
Turn the four control knobs (A, B, C, D) located on either side of
the LCD display to adjust the displayed parameters.
Parameters can also be adjusted by using the CURSOR buttons
to move the selection cursor, and –/NO or +/YES buttons to
decrease or increase the value of the selected parameter.
* Press the CURSOR c or CURSOR d buttons to cycle through the other
SYSTEM Menu pages.
Press the EXIT button to exit the SYSTEM Menu and return to the
Play Mode screen.
* The adjust SYSTEM parameters will be memorised automatically.
* To prevent data loss, avoid turning the power OFF while the MP10 is
saving SYSTEM Menu settings.
Overview of the SYSTEM Menu