MBM Corporation 352SA automatic air suction folder with Register System - Manual (Page 16)

Operator's Manual multimaster CAS 35 PBA Air Feeder PBA
Mathias Bäuerle GmbH 17
Setting the Sheet
Separation
Sheet separation is achieved by the combined action of the rotating suction drum,
the paper stop and the air.
Paper weight and type of paper have an influence on the setting.
1
2
Setting the Air
A suction drum (1) separates the sheets from
the bottom of the stack.
This is achieved by the suction segment (2)
inside the suction drum.
The angle of the suction segment with
respect to the paper stop can be changed to
suit different types of paper.
1
Basic Setting
• Loosen the screw (3).
• Shift the screw (3) to the left or to the right
until the figure "0" appears in the window (4).
• Tighten the screw (3).
Now the suction segment is in its zero
position (5).
3
4
5
Most types of paper with a weight of 80 to 90 GSM can be separated in this position.
For different paper grades, other figures must be set in the window.
- Paper grades below 80 GSM: 1 to 2
- Paper grades above 90 GSM: -1 to -2