MBM Corporation 352SA automatic air suction folder with Register System - Manual (Page 56)

Operator's Manual multimaster CAS 35 PBA Operation and Trial Folds
Mathias Bäuerle GmbH 57
13. OPERATION AND TRIAL FOLDS
When all settings and inputs for a folding job are completed and the feeder has been
loaded with paper, check the result by folding some trial sheets.
!
Exercise caution in the vicinity of rotating shafts, rollers and moving
belts! Hair, loose garments and jewellery may get caught!
SERIOUS INJURY MAY RESULT!
!
Exercise caution when running the machine with safety covers open and
fold plates removed! Do not get close to the rotating fold rollers!
SERIOUS INJURY MAY RESULT!
!
When making or breaking any electrical connection, always first turn
OFF the main switch. Non-compliance may cause damage to electronic
components!
!
Exercise caution at the delivery end of the fold unit! Do not get close to
the rotating delivery shafts! SERIOUS INJURY MAY RESULT!
Proceed as follows:
Switch on the pump (1)
Switch on the motor by touching this key (3)
Switch on the main switch of
the fold unit (2)
Activate sheet feed by touching this key (4)
- Brief touch: single sheet
- Touching key for approx. 2 sec.: continuous feed
Make some trial folds.
Switch off the machine in reverse order.
Sheet feed (4)
Motor of fold unit (3)
Pump (1)
Remove and check the trial folds.
1
2
3
4