MBM Corporation 352SA automatic air suction folder with Register System - Manual (Page 59)

Operator's Manual multimaster CAS 35 PBA Fine Adjustments and Corrections
60 Mathias Bäuerle GmbH
Out-of-Square
Paper
If the paper is not cut precisely at right angles,
the folded sheet may show "points".
By turning a setting knob (1), the fold plate stop
can be made parallel to the out-of-square leading
edge of the paper.
• Turning the knob clockwise:
The right side of the stop moves towards the
fold rollers.
• Turning the knob counter-clockwise:
The right side of the stop moves away from
the fold rollers.
1
Make this correction only in the first
fold plate!