MBM Corporation 352SA automatic air suction folder with Register System - Manual (Page 20)

Operator's Manual multimaster CAS 35 PBA Air Feeder PBA
Mathias Bäuerle GmbH 21
Front Paper Stop The position of the front paper stop (1) can be adjusted in a horizontal and vertical
direction.
Adjusting the horizontal position:
The horizontal position of the front paper stop
determines the suction point on the paper and
in turn depends on the position of the suction
segment in the suction drum.
The inclination of the suction
segment must be set correctly
before making the horizontal
adjustment.
When the suction segment is adjusted, the
horizontal position must also be changed
accordingly.
• Turn the handwheel until the openings of the suction drum (2) are exactly above
the openings of the suction segment (3).
• Adjust the horizontal position of the front paper stop in such a way that it forms
a vertical line (4) with the leading edge of the suction openings.
To achieve this, turn the knurled screw (5) counter-clockwise.
1
2
3
4
6
5
Adjusting the vertical position:
The respective paper thickness is set by adjusting the vertical position of the front
paper stop. Proceed as follows:
• Place a stack of about 50 sheets on the feed table.
• Start the machine (see paragraph 13).
!
!
!
By turning the knurled screw (6), adjust the vertical position of the paper stop in such
a way that only one sheet is pulled off the stack.
Exercise caution in the vicinity of rotating shafts and rollers!
Hair, loose garments and jewellery may get caught!
SERIOUS INJURY MAY RESULT!
Do not get close to rotating shafts and rollers while the machine is
running and the noise-absorbing cover is open!
SERIOUS INJURY MAY RESULT!
Exercise caution at the delivery end of the fold unit!
Do not get close to the rotating delivery shafts!
SERIOUS INJURY MAY RESULT!