MBM Corporation 1500S - Manual (Page 23)

23
Through above procedures, basic operation of the machine has been learnt. Now, we try in applied applications.
8. Selection of fold type
One of the six folding types (Single, Double Parallel, Fold-out,
Letter, Zigzag, and Gate) can be selected. Press the desired
fold type key.
Example:
When selecting the Single folding type, the button illuminates
as shown in the right figure.
9. Setting of the number of sheets of paper to be folded
When inputting the number of sheets of paper (preset counter):
Press the C Key to display “0” on the counter.
Input the value of necessary number using the numerical keys
from “1” to “1000”.
Then, the machine operates until the input value becomes “0”
(zero).
If the value displayed on the counter is “0”, the machine
operates until there is no paper loaded on the paper feed shelf.
Numerical key
Counter
10. Setting of the speed
When setting the speed:
The speed can be changed by using “H” key or “L” key.
The third lamp from the left (lamp in the middle) shows the
standard speed.
Note that the lamp further on the right side from the middle
shows the higher speed is set while the lamp further on the left
side shows the slower speed is set.
Set the speed according to the type of paper or fold.
Note: When folding thicker paper, machine may not fold at lower
speed. In this case, increase folding speed.
When paper shows wrinkle after folding, lower folding speed.
Speed
adjustment key
Eliminating
Illuminating