MBM Corporation 1500S - Manual (Page 26)

26
(B) Standard Folding of Non-standard-size Paper
1. Selecting a fold type.
2. Input of the total paper length
Measure the paper length.
The arrow indicates the direction of paper feed.
Press Paper Length Input Mode Key.
Paper length
input mode key
Input the paper length using the numerical keys.
The unit for input is inch.
For example: Input paper length of 11.42 inch
Press [1000] key 1 time. (Input unit of 10 inch)
Press [100] key 1 time. (Input unit of 1 inch)
Press [10] key 4 times. (Input unit of 0.1 inch)
Press [1] key 2 times. (Input unit of 0.01 inch)
Note: Units of numerical keys are one unit higher than
the unit of length
The available input range is 13.0 to 19.25 inch.
After the length is set, press the Paper Length Input Mode
Key again to fix it. When any value other than standard
ones is input, the lamp flashes. To clear the input value,
press the Length Input Mode key and press the “C” key.
Max input for Table 1 is 14.4inch and Table 2 is 9.6inch.
Numerical key
Table 1 Table 2
SINGLE ― 1/2
DOUBLE
PARA LLEL
1/2. 1/4
FOLD-OUT 1/4 1/4
LETTER 2/3 1/3
ZIGZAG 1/3 1/3
GATE 3/4 1/2
Note:
Stopper position of Table1 and Tables2. Also refer page 31.
Example)
Table1 11.0 inch × 2/3 ＝ 7.33 inch
Table2 11.0 inch × 1/3 ＝ 3.67 inch