Microcom 470 User Manual
Page 31
Chapter 4
Designing Labels Using LDS
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual
23
4.4.1 A SAMPLE SESSION (HEADER)
This is the label header from the sample label in section 4.3.
4,812,609,,20,48,,,5
5
4 -
4 fields following the header
812 -
Label width (LSX) of 812 (812/203 = 4 inches).
609 -
Label length (LSY) of 406 (609/203 = 3 inches).
-
The WEB parameter can be defaulted.
20 -
A GAP between labels of 20 (20/203 = 0.10 inch).
48 -
Label print speed (DPS) of 48 = 3.2 inches per
second (from Table 3)
-
No entry for the LCB parameter means default value
of 0, normal stock on backing paper.
-
The AGD could be defaulted. This value was
confirmed using the autosize command.
-
SPG could be defaulted. This value was confirmed
using the auto-size function.
5
5 -
A carriage return must follow the label header. There
were two parameters left that were not entered into the
header - OFX and OFY. Because they were not entered,
the printer assumes the default values, 0 in their
cases. Likewise, since the AGD and SPG were defaulted,
the carriage return could have followed the DPS.
Note: Defaulted fields must be separated by commas.