MMD Equipment 25S-3A3 - Manual (Page 15)

1.Safety
1-12
After stopping the engine, wait until engine cools down. Then
check the level of the engine oil, refill or drain the oil.
Engine oil is very hot and highly pressurized during or just
after engine operation, while draining oil, make sure engine is
cool. Hot oil could result in scalding.
When washing the machine, cover the control panel, generator and its electric parts to prevent
them from being exposed to splashing water. This will avoid decrease in electrical insulation or
other problems to the machine.
Waste liquid from the machine contains harmful material. Do not discharge onto the ground, river,
lake or sea. Such material will contaminate the environment.
Use a container to hold the waste liquid taken from the machine.
Follow designated regulations when disposing of oil, fuel, coolant (antifreeze), battery or other
harmful materials.
Refilling or draining of engine oil
Cleaning the unit
Disposal of waste liquid, etc.
H990432