MMD Equipment 25S-3A3 - Manual (Page 31)

5. Operation
5-1
5.1 Check before Starting the Unit
Be sure to check the unit before operation.
If any abnormality is found, be sure to repair it before starting the unit.
Make sure daily checks are done before operation. If the unit is operated without prior checking
and abnormality exists, operation could cause seizure of components or may cause a fire.
5.1.1 Check Items and Places
SDG25S
SDG45S/60S
① Check clogging of air filter element.
② Check V-belt tension.
③ Check coolant level.
④ Check engine oil level.
⑤ Check condensation in water sedimenter.
⑥ Check fuel.
⑦ Drain fuel tank.
Check wiring of each part.
Check before starting the unit
H990190
H990191