MMD Equipment 25S-3A3 - Manual (Page 44)

6. Periodic Inspection/Maintenance
6-2
6.2 Daily Inspection and Keeping Operation Log
Carry out daily inspection every morning before operation. See Chapter 5 "Operation" of
the manual for details of inspection.
Pay attention to and carefully observe the following points during daily operation or
inspection and maintenance work. If any problem or abnormality is found, immediately
investigate the cause and make repairs. If the cause is unknown, or if the trouble involves
a part or component not described in the manual, ask your nearest dealer for servicing
information.
a) Controls and instruments function properly.
b) Levels and any leaks of water, fuel, and oil or any
contamination should be checked.
c) Appearance, abnormal noise or excessive heat
should be checked.
d) Loose bolt or nut should be checked.
e) Any damage, wear or missing machine
components and parts should be checked.
f) Performance of each part or component should be
adequate.
Keep an operation log to record daily inspections of each component. Any trouble of the
unit can be easily discovered and preventive measures taken.
It is very useful to record information such as frequency, temperature, current and
maintenance items on a daily log.
TR0049