MMD Equipment 25S-3A3 - Manual (Page 5)

1.Safety
1-2
1.1 Caution before Operation
Make sure not to connect the output terminal of the
machine with commercial power source from electric
power company. It may cause electric shock, machine
problems and even a fire.
Any source of high voltage is a source of potential
LETHAL voltage. Maintain all electrical cords and
connections in proper condition. Do not operate the unit
in the rain, around standing water or when wet. Always
ground the generator properly before operating.
Never allow untrained or unqualified individuals to
operate or remain in the vicinity of the equipment when
it is operating.
When connecting a cable to the load, do not use a
cable with damaged covering or with inappropriate
insulation.
Make sure connections between input/output
terminals are tight. Otherwise, it may loosen during
operation which may cause a fire or electric shock
accident.
Exhaust gas from the engine is poisonous, and could
cause death when inhaled.
Avoid using the machine in an insufficiently ventilated
building or tunnel.
SG0101
Ventilation
H990208
PC002