Montigo H36PVN - Manual (Page 7)

H36PVN Power Vent Indoor Gas Fireplace
Page 7
XG0649 - 031511
Installation
Section 3: Finishing
Step 1. As shown in Figure 3; Use Non combustible Cement board,
supplied by Montigo, screw to Non-combustible Header and 2 x 4's
at sides of unit (see figure 2a on page 6) using sheet metal screws .
Step 2. As shown in figure 3a; Cut standard Drywall / Wall board
to complete the installation of fireplace surround .
Non-combustible Cement Board
(supplied by montigo).
Fasten above the glass of the
unit to Non-combustible header
and 2 x 4’s at side of unit.
Combustible Drywall / Wall
Board or equivelant.
Fasten above the glass of the
unit to Non-combustible header
and 2 x 4’s at side of unit.
Figure 3. Non-combustible Cement Board the Fireplace, (supplied by Montigo).
Figure 3a.