NewTek TriCaster Studio - Manual (Page 121)

Page | 101
6.12.1 VIDEO SIGNAL
OUTPUT MODE
Choose Component or Y/C for the primary output connection type.
OUTPUT MODE (PREVIEW)
TriCaster BROADCAST supplies an alternate configurable output in addition to Program output.
Use this to assign the connection type for the secondary output, again selecting between
Component or Y/C.
PREVIEW / ALPHA OUTPUT
This control allows you to designate what video stream is sent to the alternate video output.
Your output signal options are:

Disabled

Preview Row

Effects Row

Alpha from Main

Alpha from DSK (Overlay)

Alpha from Main+DSK (Overlay)
ALPHA OUTPUT DELAY
Use this control to adjust alpha output timing when necessary to ensure the alpha and color
output streams are synchronized.
CLAMP OUTPUT TO LEGAL COLORS
TriCaster is capable of retaining and working with colors that fall outside of the normal
luminance range (0 – 100 IRE), and similar ‘extra-legal’ Chroma ranges. Although this can be
useful in the right hands, out-of-range chroma can exhibit problems on output to certain displays
(especially visible in Y/C and composite video.)