Omnia Audio Omnia.9/XE - Manual (Page 30)

Outbound Connection Menu
Connecting remotely to Omnia.9/XE is normally involves using the NfRemote client software to initiate a
a connection. The Outbound Connection menu allows this to happen in reverse by providing a means
by which Omnia.9/XE can initiate the connection to an NfRemote client. This can be especially useful
when working with Omnia Support as it allows communication outside of the local area network (LAN)
without having to set up port forwarding.
Details for setting up a corresponding inbound connection are provided in Chapter 14, “Using the
NfRemote Client Software”.
• Enter the IP address (or host name) and listening port of the computer running NfRemote using the
following example as a guide: 127.0.0.1:2000 (the IP address and the listening port with a colon in
between). The IP address and port should match those on the NfRemote end of the connection.
Three connection slots are available.
The Common Menu
30